Yamaha RD250, RD350, and RD400 Vintage Rotor Kit, VMD2025-RD-KIT

Product Description

Yamaha RD250, RD350, and RD400 Vintage Rotor Kit

The RD250, RD350, and RD400 rotor kit uses the same MD2025 or VMD2025 rotor and a stainless steel spacer that is placed between the hub and the rotor for proper alignment.

To use this rotor on the RD250, RD350 and some RD 400's YOU MUST modify your brake caliper inner half as shown to clear the floating rivets on the rotor

Some RD400's are already equipped with the cut out caliper style but may require a small amount of material removal on the edges of the cut out.

This does not affect the calipers structural integrity nor does the rotor come into contact with the brake pad or caliper piston.

Applications

• RD250/350 Front
• RD400 Front
• RD400 Rear

Actual rotor has 6 mounting holes, the picture is a general EBC picture with a different center carrier, ( the rotor and carrier have the same appearance)

(don't forget new lock tabs)