Vape

Dual Lead ignition coil 7238, Vape

Dual Lead Ignition Coil Replacement coil for dual lead coils.   The number on your coil should match the 72

Battery Eliminator

Battery Eliminator   Takes place of the battery forVape and Magnito type ignitions. Boosts spark voltage at cranking; eliminat

Dual Lead ignition coil 9521, Vape

Dual Lead Ignition Coil Replacement coil for dual lead coils.   3 wire coil with the blue

Dual Lead ignition coil Sport ignition, 7100-2, Vape

Dual Lead Ignition Coil Replacement coil for dual lead coils.   The number on your coil should match the 71

Generator/Ignition for Yamaha DS6, DS5, TD2, YM2, YM2C

Generator/ignition for Yamaha DS6, DS5, TD2, YM2, YM2C   Magnet based generator with integrated solid state ignition. Output 12V/180W DC.Replaces the complete old magneto system. Solid state,...

Ignition & Charging system, Yamaha CS3, CS5, 786179900

Yamaha CS3/CS5/CS200 INGNITION AND CHARGING SYSTEM   Magnet based generator with integrated solid state ignition. Output 12V/180W DC. Replaces the complete old magneto system. Solid state,...

Ignition & Charging system, Yamaha CT1/CT2/CT3, AT-M; Yamaha RS100/125 (Later version, 130mm) 781279900

Yamaha CT1, CT2, CT3, AT-M, RS125 (later version)Factory magneto-type ignition, 130 mm stator, Clutch mechanism in side cover, twin shock Magnet based generator with integrated fully electronic...

Ignition & Charging system, Yamaha RD200 Type 397 and Type 1E8 (12V/150W) 783379900

Ignition & Charging system, Yamaha RD200 Type 397 and Type 1E8 system has no electric start function, engine has to be started with Kickstarter! Questions and Installation instructions. 

Ignition coil 9523, Vape Single Lead

Dual Lead Ignition Coil Replacement coil for Single lead coils.   The number on your coil

LIPO Regulator 12v (140W) VAPE, A-R102-4

Regulator 12v (140W) for lithium-ion batteries The regulator is suitable for use with motorcycle lithium-ion batteries Replaces Regulator A-R7300.   red = red = plus 12Vbrown = brown = minus...

Puller, Vape Ignition, 99 99 799 34

Rotor Puller For Vape Systems Only in very few cases your stock rotor puller will be suitable for the VAPE rotor.inverse

Regulator 12v (140W) VAPE, A-R7300

Regulator 12v (140W) Note, this is a spare for VAPE systems, use in other systems is not tested. regulator does not support charge control lamp  This regulator was specifically designed for use...