Yamaha Carburetor Replacement parts
Mikuni Needle Jet
169 Series Primary type
Yamaha RD 250/350 Carburetor Boots for Low Top Type Carburetors
Fits great on the Low Top type carburetors,
Sold as a set of two
Original equipment on the Yamaha RD 250's/350's
Will also work on R5's, DS7's and many other bikes with the Mikuni...
Spare Jet Carrier
Store your spare jets and needles in this molder rubber case. the case will stay closed with 4 friction pins.JETS NOT INCLUDED
20 compartments for main or pilot jets
3 jet needle locations
6 larger compartments to store longer...
DYNOJET, JET KITFor Yamaha RZ 350 1984-1985Stage 3 Jet Kit fits in stock/mild modified engine, stock/modified pipes, and individual air filters with about a 10-15% power increase. For improved:
Float Bowl Gaskets for RD250, 350, 400 1973-1979
Sold as aset of 2
Due to the high cost of float bowl gaskets, HVCcycle now makes our own float bowl gaskets for the RD350 and RD400 models. These gaskets are made from the highest quality gasket...
Float Bowl Gaskets R5, DS7, 1970-1972
Sold as a Set of 2
Due to the high cost of float bowl gaskets, HVCcycle now makes our own float bowl gaskets for the RD350 and RD400 models. These gaskets are made from the highest quality gasket material at less...
Float Bowl Wrench 17mm
Designed to remove 17mm float bowl drain plugs
Made from lightweight 6061 T-6 aluminum
Fits most off-road and dual sport motorcycles
Compact design to carry in your tool pack
12 point hex and low profile design for tight...
Carburetor Float and pin for Yamaha
Direct OEM-style replacement carburetor floats for Mikuni carbs
Include float pin
Sold as a set for one carburetor
1972 - 1973
Fuel and Carburetor Fuel and Vent Line
High-quality polyurethane construction
Carburetor vent line 1/8” i.d.
Choice of clear or black
Comes in 5’ lengths
Made in the U.S.A.
Main Jet Plug Washer
Fits VM 28, 40-44 Carburetors and also Yamaha OEM carbs
1998 RACE KART - YZ125K-SK YZ-80-SK-CARBURETOR
1998 RACE KART - YZ80K-SK YZ-80-SK-CARBURETOR
Main Jet Washer All Mikuni Carburetors without main jet ring VM20/169
When you are rebuilding your carburetor, use Mikuni direct replacement parts as your foundation. Mikuni main jet washers are the replacement pieces that will keep your carburetor...
Mikuni Curved Cable Adjuster.
sold as each
screws into the top of the carb top
Mikuni PN 01-0014