Seat Products

Clevis Pin Clips Set of Two,90468-10050-00, HVC20056-1

Clevis Pin Clips Set of Two

Motorcycle Tool Pouch, HVC200145

Vintage Motorcycle Tool Pouch Tools not included Similar to Yamaha and Honda tool pouches will work for many vintage and modern motorcycles. Measures in the closed position 7 inches long x 3 3/8 inch wide or 179mm x 85.75mm    

Riv-Nut Installation Tool, 6x1 thread, 96349A764

Wrench-Drive Rivet Nut Installation Tools Install rivet nuts and rivet nut inserts. Use a 7/8" wrench (not included) to hold the tool and an 11/16" ratchet (not included) to tighten the nut. Wrench-Drive Rivet Nut Installation Tool for M6 Thread Size...

Riv-nut Pack. (10) For Fiberglass Seat Pans, 97217A444

Riv-Nut to install rear cowl on the RD400F Reproduction Seats and Seat pans   Zinc/Yellow Plated Steel Rivet Nut for Plastics M6 x 1 Internal Thread, 0.50-7.10mm Material Thickness Nuts resist pull-through in thin plastic and composites thanks...

Seat Cover Alligator Strip

Alligator Strip Here is the answer for installing Seat covers Use on older metal pans where the the clips are broken offUse on plastic molded seat pansUse on fiberglass seat pansTop choice of 2 major motorcycle seat manufacturesDesigned...

Seat Cover Strap, Universal

Hand Strap If You Just Need a Hand Strap Reinforced Hand Strap Universal Fit Cut Down to Size 28 inches long. Long Enough to Work on most Motorcycle Seats

Seat Pan Wire Mesh

Seat Pan Wire Mesh Replacement Wire mesh for the bottom of the seat pan. Found on the 1960's Yamaha seats. 3 X 3 inch square made from weather-resistant Galv Steel Woven Wire Cloth, 5 X 5 Mesh, .035" Wire Diameter.

Seat Trim Rivet Clip, 2102

Seat Clip for Seat Rivets Use these clips for Rivets PN 1J7-24789-00-00 sold as each. Fits most Yamaha seat trims from 1970-1980 1970-1972 R5/DS7 1973-1975 RD250/350 1976-1978 RD400

Seat Trim Rivet Clips 2099

Seat Rivet Clips for the HVC rivets PN 97481A181 $.25 each

Suzuki Tool Pouch, HVC200145

Vintage Motorcycle Tool Pouch Tools not included Similar to Yamaha and Honda tool pouches will work for many vintage and modern motorcycles. Measures in the closed position 7 inches long x 3 3/8 inch wide or 179mm x 85.75mm    

Yamaha / Suzuki Seat Trim Rivets 97481A1810

Seat Rivets Smaller Head for the trim strips that are narrower 6.5mm round x 1.2mm x 19mm Great for the 1965-1969 Yamaha seat trims and  Suzuki GT seat trims. Use PN 2099 Rivet clips Applications we have used these on so far but not limited to ...

Yamaha RD Document Holder Latch, HVC20062

Yamaha RD Seat Document Flap Latch Fastener Latch fastner for the Yamaha RD docunet flap. To use you must completly remove the old latch fastner from the document flap and the retainer from the pan if it still located in the pan. Sold as one, (picture...