Motorcycle Oil Injection
Oil Injection Bolt Washers
Sold as each
Oil Injection Cap Gasket
Used with OIl Injection Cap HVC200179
Yamaha Part Numbers 90430-29114-00, 214-21772-00-00
1968 DT1 OIL TANK
1968 YAS1C OIL TANK
1968 YCS1 OIL TANK
1968 YCS1-YCSlC OIL...
Oil Injection Fill Cap with Gasket
Cap, Yamaha PN 214-21771-00-00 or, 1A0-21771-00-00
Gasket, Yamaha PN 90430-29114-00
All Yamaha RD's
1968 DT1 OIL TANK
1969 AT1E OIL TANK
1969 AT1M OIL...
Oil Injection Line Block Off Plug
HVC Signature Item
Block off the gap when you remove the oil injection pump and hoses
Fits into the Right side cover.
Fits Yamaha R5, DS7,RD350, RD400
Oil Injection Line Clip
Spring Clip secures the oil injection line so it will not pull off.
OEM Yamaha PN 90468-02033-00
USE with oil injection line PN HVC20060
All Yamaha 2-strokes that have the Oil-Injecion Pump from 1964
Oil Injection Line
Replaces Yamaha part # 90445-05M07-00, 90445-05773-00, 214-13161-01-00, 90445-05301-00
Use clips with hvc20058
One line needed for the RD250, RD350, RD400, R5, DS7, and all DT's
Two Lines needed for RZ350, RD350LC,...
Oil Injection Nozzle
Reproduction Oil Injection Nozzle
Presses into the carburetors
Replaces Yamaha PN, 1A1-14000-99-00, 360-14333-00-0
Yamaha RD250, 350, 400 1973-1979
many other applications possible
amaha DT models...
Oil injection Priming Nozzle for oil injection Mikuni VM34/181
Geniune Mikuni Part
Oil Injection Pump Block Off Plate
Use this kit when you remove the oil injection pump to run Pre-mix.
Block off plate is made from 0.080 inch aluminum that has been laser cut to the exact size of the oil pump mating surface.
Includes the Plate and...
Oil Injection Pump End Plug
Replacement seal for the Yamaha Oil Injection pumps without the thumb wheel.
Not included in the oil injection pump rebuild kit
High quality Nitrile rubber end cap
Yamaha Oil Injection Pump drive pins
Small internal spring loaded pins for the Worm Wheel.
Commonly get lost on oil pump rebuild
Sold as a set of 2
2 X 4mm
Works on all Yamaha oil injection pumps with the white thumb priming wheel...
Yamaha Oil Injection Pump Shims
Brass and copper Shims
Set your oil injection pump up correctly by shimming properly.
All Yamaha 2-stroke oilinjection work gear pumps