1973-1975 RD250/RD350

Yamaha Kick Start Rubber Cover Yamaha, HVC2050, 156-15618-01-00

Kick Start Rubber Cover Is your old worn-out rubber needing replaced? Well, Here's your answer to make it new again! Fit Many Yamaha Motorcycles Original Yamaha PN 156-15618-01-00

Yamaha Oil Injection Tank Fill Pipe ,360-21753-00-00

Oil Injection Tank  Fill Pipe Attaches to the oil injection tank and the fill manifold Reproduction Part, No longer available from Yamaha. NOTE: for use on the DS7 and R5, you must also purchase the fill tank manifold and cap PN 360-21752-00-00...

Yamaha Oil Injection Tank Level View Glass,360-21761-00-00

Yamaha Oil Tank Level View Glass Reproduction item Replace your leaking or clouded over view glass. NOTE:  When installing after a  new Paint job, the hole must be as close to bare metal as possible or it may not fit. NOTE:  Install...

Yamaha RD Air Box Cover Strap, 278-14459-00-00, HVC200114

Yamaha Air Box Cover Strap 1970-1975   Very rarely do you find an RD or R5 with the stock air box cover strap in place. Finally a solution, HVC's simple but effective strap will secure the air box cover in place. Replacement for Yamaha Part...

Yamaha RD Document Holder Latch, HVC20062

Yamaha RD Seat Document Flap Latch Fastener Latch fastner for the Yamaha RD docunet flap. To use you must completly remove the old latch fastner from the document flap and the retainer from the pan if it still located in the pan. Sold as one, (picture...

Yamaha RD Footrest Bracket Damper Set, 278-27414-01-00

Rider Footrest Bracket Damper Set Yamaha R5, DS7, RD250, RD350 HVCcycle reproduction part No longer available from Yamaha Set of four, to mount one foot peg bracket Various Yamaha Part Numbers 99-99900-96-10 27-82741-40-10 ...

Yamaha RD Oil Injection Line Holder, 278-13174-00-00, HVC200118

Oil Injection Line Guide HVC Reproduction Item, Replaces Yamaha PN 278-13174-00-00, HOLDER, OIL PIPE Fits into the right side cover Replace your hard dried out guide with our new guide. Applictions   1970 R5 OIIL PUMP   1971 R5B OIIL PUMP...

Yamaha RD Oil InjectionTank Hose, 278-21766-00-00, 90445-09122-00, 90445-090F6-00

Oil Injection Tank Hose This is the oil tank hose that attaches to the bottom of the oil tank and runs to the oil injection pump. The line is the correct size for the side cover grommet. Yamaha PN 278-21766-00-00, 90445-090F6-00 and...

Yamaha RD R5 Cylinder Fin Absorbers 521-11162-01-00

Cylinder Fin Absorbers Cylinder  Fin Absorbers, Set of 4 Reduces cylinder vibration and noise No longer available from Yamaha, HVC reproduction item. sold as a set of 4 Applications: R5/DS7 70'-72 RD250/350 73'-75' other applications possible

Yamaha RD Rear Fender Damper Kit, HVC200101

Rear Fender Damper Kit Includes a set of (4) NOS Rear Fender Rubber Grommets for the rear fender 2 Large dampers Yamaha Part Number 168-21639-00-00 2 Small dampers Yamaha Part Number 90480-14023-00, or HVC20043  Requiers the metal insert...

Yamaha RD Shifter Shaft Boot, 278-18131-00-00

Shifter Shaft Boot Reproduction Part Fits over the shift shaft under the left engine side cover. Applications: R5, DS7  70'-72' TD3, TR3 1972 RD250, RD350 73'-75' RD400 76-80 TZ250, TZ350 73'-80' XS360 76'-77' XS400 78'-81'

Yamaha RD, R5, DS7 Handle Bar Mount Peg Bushings, HVC20096-1, 90890-55902-00

Handle Bar Mount Peg Bushings Inserts into the top Triple Clamp Set of Four HVC reproduction item, Replaces OEM Yamaha PN 90890-55902-00 and 278-23434-00-00 Applications Yamaha RD250, RD350 73'-75' Yamaha R5, DS7, 70'-72