Product Description
Regulator 12v (140W) for lithium-ion batteries
The regulator is suitable for use with motorcycle lithium-ion batteries
Replaces Regulator A-R7300.
red = red = plus 12V
brown = brown = minus (ground)
the brown ground cable is connected to the housing in the controller. However, it is better not to rely on the screw contact of the regulator to ground and to screw the cable to ground. Any mix-up of the plus and minus cables or any polarity reversal of the battery, even for a short time, will destroy the controller immediately. black = black = connection of the two black cables from the PD alternator. Since these two black cables have alternating voltage, it doesn't matter which black cable goes on which. It is important not to connect any of these cables to ground or have any accidental contact with ground.
- Some Application but not limited to.
- Yamaha RD's 250, 350, 400 1975-1979
- Yamaha R5, DS7
- Yamaha DT1, DT2, DT3, DT250, RT DT360, DT400
- Any system that uses the regulator R7300
